Commercial HVAC Coil Manufacturers Microchannel Condenser for Car (1R-100T-1000)

Product Description

1. Braze welding vs expanded tube joint
2. Metallic bonding between Micro channel tubes and fin.
3. Off the shell high performing split a/c system was examined in ARII conditions A, B and C with two condensers: Micro channel flat plate fin.
4. Condenses had the same volume, face, and air side area.
5. Micro channel condenser performed better and consequently system performed better.
6. Average increase in capacity is 4% and in COP IS 17% improve
7. Charge reduction is 19% for the condenser and 9% for the system.
8. The MCHX has better corrosion resistance
9. The MCHX is built to last
10Area available for heat transfer in micro channel HX

Item	Condenser type	Operation medium	Operation pressure ( MPa )	Application
1	Φ 16/Φ 9.52/Φ 12.7 Copper tube with aluminium fin	Cold/hot water	≤ 1.6	Used for combined air handling unit, fan coil etc air conditioning devices
2	Φ 18/Φ 20 Steel pipe winding with steel sheet	Steam	≤ 0.2	Used for combined air handling unit, fan coil etc air conditioning devices
3	Φ 16/Φ 9.52/Φ 12.7 Copper tube with aluminium fin	Brine	≤ 1.6	Used for heat transfer in cold storage and all kinds of low temperature systems
4	Φ 9.52/Φ 7.94/Φ 7 Copper tube with aluminium fin	Ethylene glycol	≤ 1.6	Used of energy recovery and low temperature system devices
5	Φ 16 Copper tube with aluminium fin	Ice mud	≤ 1.6	Used for dry operation condition, fresh air dehumidification etc systems
6	Φ 9.52/Φ 7.94/Φ 7 Copper tube with aluminium fin	R22	≤ 1.9	Used for industry and commerce air conditioning system
7	Φ 9.52/Φ 7.94/Φ 7 Copper tube with aluminium fin	R407C	≤ 1.9	Used for industry and commerce air conditioning system
8	Φ 9.52/Φ 7.94/Φ 7 Copper tube with aluminium fin	R134a	≤ 3.1	Used for vehicle and vessel etc transportation devices